Nothing else comes close. Trimble Universal Total Stations lead the industry in accuracy, range and reliability for fine grading, paving, stockpile scanning and site measurements.
Features and Benefits
Patented Trimble technology ensures you’re getting the best performance on jobs that require the tightest precision with the fastest update rate available today.
-
MultiTrack Technology
- Locks on and tracks passive prisms for control measurements, and active prism targets for grade control and paving applications
- Prevents costly delays and subsequent rework; faster speed means increased productivity and faster results to grade
-
MagDrive
- Trimble MagDrive™ servo technology is an electromagnetic direct drive servo system which gives high turning speeds and accuracy, the frictionless motion removes servo noise and reduces instrument wear
- Turns the instrument up to 115° per second. Patented high speed Trimble MagDrive technology allows for faster grading closer to the total station
- For measurement tasks, MagDrive offers fast pointing, aiming and tracking, plus slow motion controls for manual aiming
- Endless horizontal and vertical motion, including fine adjustment
-
SurePoint
- Automatically corrects the horizontal and vertical angles and instrument pointing for mislevelment of the instrument
- Means your measurements will be accurate, even if you don’t set up the instrument perfectly level
-
20Hz Update Rate
- Fixed, low latency, synchronised data and a 20 Hz update rate
- Reliably track a machine target and know the data is being passed from the instrument to the machine as quickly and accurately as possible
- The motor grader or dozer operator can conduct real-time fine grading operations to millimeter accuracy while minimising rework and increasing productivity
-
3Hz DR Scanning
- Scanning capability for vertical / sloping profile measurements and stockpile scans
- Reduces the time to measure material stockpile volumes or profile rock faces safely
-
MultiTrack Technology
- Locks on and tracks passive prisms for control measurements, and active prism targets for grade control and paving applications
- Prevents costly delays and subsequent rework; faster speed means increased productivity and faster results to grade
-
MagDrive
- Trimble MagDrive™ servo technology is an electromagnetic direct drive servo system which gives high turning speeds and accuracy, the frictionless motion removes servo noise and reduces instrument wear
- Turns the instrument up to 115° per second. Patented high speed Trimble MagDrive technology allows for faster grading closer to the total station
- For measurement tasks, MagDrive offers fast pointing, aiming and tracking, plus slow motion controls for manual aiming
- Endless horizontal and vertical motion, including fine adjustment
-
SurePoint
- Automatically corrects the horizontal and vertical angles and instrument pointing for mislevelment of the instrument
- Means your measurements will be accurate, even if you don’t set up the instrument perfectly level
-
20Hz Update Rate
- Fixed, low latency, synchronised data and a 20 Hz update rate
- Reliably track a machine target and know the data is being passed from the instrument to the machine as quickly and accurately as possible
- The motor grader or dozer operator can conduct real-time fine grading operations to millimeter accuracy while minimising rework and increasing productivity
-
3Hz DR Scanning
- Scanning capability for vertical / sloping profile measurements and stockpile scans
- Reduces the time to measure material stockpile volumes or profile rock faces safely
SPS730 and SPS930 Universal Total Stations Downloads
Downloads
Firmware
Documentation
Documents and User Guides
Trimble SPS Series Universal Total Stations provide the highest possible degree of accuracy for construction site positioning, stakeout, measurement and machine control.
You can use them for:
- Smaller construction sites or combined with GNSS on larger sites
- Tasks where the accuracy requirements are very tight
- Measuring dangerous or inaccessible locations
- High precision machine control and guidance
- Reflectorless measurement of stockpiles, rock faces, cuttings and structures
- Layout of structures, foundations, caissons and piles
- Tunnel measurement
- As-built records and grade checks on laid material
The SPS730 and SPS930 use the Trimble DR Standard long-range reflectorless EDM technology for single-shot measurements, operating with a Trimble controller, or a Trimble tablet running Trimble Siteworks Software.
SPS Universal Total Stations are available in two models, depending on the level of functionality needed.
Robotic, One-Person Operation
- Measures the position of the target and reports that position information via radio link to the controller, so there is no need for a second person to complete tasks
UTS, One-Person Operated and Machine Control
- UTS capability reliably tracks a machine target and passes the positioning information from the total station to earthmoving machine as quickly and accurately as possible
Request More Information
Paving Control for Asphalt Pavers
Speed up paving production while laying a smoother surface and reducing material costs.
Paving Control for Slipform Pavers
Once you start paving concrete with PCS900, you’ll wonder how you could ever use string line. Trucks can pull up and dump without driving around string. You’ll stop less often, grind fewer problems and blow away your target IRI number.
Siteworks Positioning Systems
Trimble Siteworks Positioning Systems are designed to eliminate downtime by making every minute more productive. Handle complex files and 3D data sets quickly, so you can spot issues and solve problems before they slow you down.
Trimble Controllers
Trimble TSC5 and TSC7 Controllers are wirelessly connected, rugged handheld data collectors for GNSS or total station operations.
Trimble Tablets
Connect your office to the field with a Trimble tablet, rugged and fully connected field computer for construction measurements and site positioning. Brains and brawn. What could be better.